• PHG71A - For hammering applications
• PHG56A - For scraping applications
• PHG51A - For sheet metal ripping and cutting
• PHG61A - For cutting tail pipes and other surfaces
• PHG70A - For weld removal
• PHG59A - For removal of pins
• PHG83A - For removing and installing valve guides
• PHG151A - Edges and trims sheet metal. Cutting end is offset 25°. Non-turn shank
• PHG161A - Cuts exhaust system pipes, 1/8tip thickness. Non-turn shank
• PHG155A - Cuts bolts, nuts, tees and angles. Also splits and bevels. Non-turn shank
• PH200D - Use for fast, easy insertion/removal of air hammer bits
| |
|
|
|
Set Contains: |
PHG1005AK |
PHG1055K |
PHG1066K |
| Stock No. |
Description |
Application |
Length,
inches |
Tip, inches |
|
|
|
| PHG71A |
Round Hammer |
For hammering applications |
4-1/4 |
1 |
|
|
• |
| PHG56A |
Air Hammer Scraper |
For scraping applications |
6-3/16 |
1-5/16 |
|
|
|
| PHG51A |
Air Hammer Sheet Metal Ripper |
For sheet metal ripping and cutting |
5-3/8 |
5/8 |
• |
|
|
| PHG61A |
Air Hammer Slitting Chisel |
For cutting tail pipes and other surfaces |
6-7/8 |
1 |
• |
|
|
| PHG70A |
Air Hammer Spot Weld Breaker |
For weld removal |
6-1/4 |
3/4 |
• |
|
|
| PHG59A |
Air Hammer Tapered Punch |
For removal of pins |
6-1/2 |
3/16 |
|
• |
• |
| PHG83A |
Valve Guide Remover |
For removing and installing valve guides |
7.48 |
7.7 mm pilot |
|
|
|
| PHG151A |
Panel Cutter |
Edges and trims sheet metal. Cutting end is offset 25°. Non-turn shank |
6-7/8 |
5/8 |
|
|
|
| PHG161A |
Slitting Chisel |
Cuts exhaust system pipes, 1/8tip thickness. Non-turn shank |
8-3/4 |
1 |
|
|
|
| PHG155A |
Air Hammer Cold Chisel |
Cuts bolts, nuts, tees and angles. Also splits and bevels. Non-turn shank |
7 |
21/32 |
|
|
|
| PH200D |
Universal Quick Change Chuck Retainer |
Use for fast, easy insertion/removal of air hammer bits |
— |
— |
|
|
|
